Norden 341-1OS2S315 SC/APC OS2 Fiber Optic Pigtail 1.5m PVC – Single Mode Fiber Cable UAE

Reliable fiber termination is an important part of building stable optical communication networks. Whether you are installing a fiber distribution system, preparing a patch panel or completing an FTTH connection, selecting a compatible fiber optic pigtail helps support an organised and dependable installation. The Norden SC/APC OS2 Fiber Optic Pigtail 1.5m PVC (Model: 341-1OS2S315) is designed for fiber splicing and termination applications in telecommunications and structured fiber networks.

Featuring an SC/APC connector, OS2 single mode fiber and a 1.5-metre PVC-jacketed cable, this pigtail can be used by network installers and system integrators for suitable fiber optic termination work across commercial and infrastructure environments in the UAE.

Norden SC/APC OS2 Fiber Optic Pigtail – Product Overview

A fiber optic pigtail is a short length of optical fiber with a connector fitted at one end, while the other end is left unterminated for splicing. It is commonly used to connect incoming optical fiber to equipment or termination points inside a fiber distribution enclosure or patch panel.

The Norden 341-1OS2S315 combines an SC/APC connector with OS2 single mode fiber in a 1.5-metre cable assembly. Its PVC jacket provides the specified cable covering for suitable indoor installation environments, subject to the project's cable and fire-safety requirements.

Product Specifications

Specification	Details
Brand	Norden
Product Name	SC/APC OS2 Fiber Optic Pigtail
SKU	61
Model	341-1OS2S315
Connector Type	SC/APC
Fiber Type	OS2 Single Mode
Cable Length	1.5 metres
Jacket Material	PVC
Applications	Fiber splicing, patch panels, FTTH and telecommunications
Warranty	1-year repair or replacement warranty

Key Features of the Norden 341-1OS2S315 Fiber Pigtail

1. SC/APC Connector for Optical Termination

The pigtail features an SC/APC connector, which uses an angled physical contact end face to help reduce optical back reflection when connected to a compatible SC/APC interface. This makes it suitable for fiber systems designed around APC connections, including many FTTH and telecommunications applications.

Always match the connector polish and interface at both ends of the connection. SC/APC and SC/UPC connectors should not be treated as interchangeable.

2. OS2 Single Mode Fiber

OS2 is a single mode optical fiber category commonly used for longer-distance telecommunications and high-capacity network infrastructure. It supports optical links where single mode fiber is specified by the network design.

For installers, selecting the correct fiber category is important for maintaining compatibility with the existing optical cable plant, transceivers and network equipment.

3. Practical 1.5-Metre Cable Length

The 1.5-metre cable length provides a practical connection section for fiber termination work inside suitable enclosures, distribution boxes and patch panel installations. The required length should be checked against the enclosure layout and cable routing plan before installation.

4. PVC Cable Jacket

The cable uses a PVC jacket. This provides the specified outer covering for the pigtail, but the installer should confirm that its fire rating, installation environment and cable construction meet the applicable project requirements. Do not assume it is suitable for every riser, plenum or outdoor application.

Where Can You Use an SC/APC OS2 Fiber Optic Pigtail?

Fiber Optic Splicing

Fiber pigtails are commonly fusion-spliced to incoming optical fiber cables. The connectorised end can then be connected to a compatible adapter or optical interface, creating a practical termination point within a fiber enclosure.

Fiber Patch Panels and Distribution Boxes

In structured fiber networks, pigtails help terminate individual fibers inside patch panels and distribution enclosures. Correct routing, splice protection and labelling help technicians manage connections and simplify maintenance.

FTTH Networks

Fiber-to-the-Home deployments use optical fiber to deliver broadband connectivity to residential premises. SC/APC interfaces are commonly specified in FTTH environments, making connector compatibility an important consideration when selecting pigtails and related components.

Telecommunication Infrastructure

Telecom rooms, fiber distribution points and network infrastructure installations may use single mode pigtails to complete optical fiber termination. The OS2 fiber type is suitable where the network design specifies OS2 single mode connections.

Why Choose the Correct Fiber Optic Pigtail?

Choosing a pigtail based only on cable length or connector appearance can lead to compatibility problems. Before procurement and installation, check the following:

• Connector type: Confirm that the equipment or adapter requires SC/APC.
• Fiber category: Verify that OS2 single mode fiber matches the installed cable and network design.
• Cable length: Select a length that allows suitable routing without excessive bending or tension.
• Jacket material: Confirm PVC is appropriate for the installation environment and project specifications.
• Splicing compatibility: Check the pigtail's fiber construction and dimensions against the splicing equipment and cable being used.
• Installation quality: Use appropriate splice protection, connector cleaning and optical testing procedures.

Fiber Pigtail vs. Fiber Patch Cord

Fiber pigtails and fiber patch cords both provide connectorised fiber connections, but they serve different installation purposes.

Feature	Fiber Pigtail	Fiber Patch Cord
Connector ends	One connectorised end	Connectors at both ends
Typical use	Splicing and permanent fiber termination	Connecting equipment, panels and optical ports
Installation	Usually spliced to an incoming fiber	Connected directly between compatible interfaces
Common locations	Fiber splice trays and termination enclosures	Patch panels, switches and optical equipment

The Norden 341-1OS2S315 is a fiber pigtail intended for termination and splicing work, rather than a standard two-ended patch cord.

Important Installation Considerations

Correct handling helps protect fiber performance and reduce installation issues. Follow these basic practices:

• Keep connector end faces clean and inspect them with an appropriate fiber inspection tool before connection.
• Use a compatible fusion splicer and follow the manufacturer's procedures for fiber preparation and splicing.
• Protect completed fusion splices with suitable splice protection sleeves.
• Maintain the minimum bend radius specified for the cable and installation.
• Avoid pulling, twisting or placing unnecessary tension on the pigtail.
• Test completed optical links using suitable inspection and measurement equipment.
• Use the correct laser safety procedures when working with active fiber optic systems.

Buy Norden SC/APC OS2 Fiber Optic Pigtail 1.5m in UAE

Looking for a Norden SC/APC OS2 fiber optic pigtail supplier in Dubai or elsewhere in the UAE? Marvis Digital can assist businesses, contractors, network installers and system integrators with product enquiries for the Norden 341-1OS2S315.

Share your required quantity, project specifications and delivery location to confirm product availability, pricing and suitability for your installation. For larger fiber infrastructure projects, you can also enquire about related fiber optic connectivity and structured cabling requirements.

Request product details or a quotation: Contact Marvis Digital on WhatsApp.

Frequently Asked Questions

1. What is the Norden 341-1OS2S315?

It is a Norden SC/APC OS2 single mode fiber optic pigtail with a 1.5-metre PVC-jacketed cable, designed for fiber splicing, patch panels, FTTH and telecommunications applications.

2. What does SC/APC mean?

SC identifies the connector style, while APC means Angled Physical Contact. The angled connector end face helps reduce optical back reflection. It must be connected to a compatible SC/APC interface.

3. Is this pigtail single mode or multimode?

This model uses OS2 single mode fiber. It is intended for optical network designs that specify OS2 single mode cabling.

4. What is the cable length?

The Norden 341-1OS2S315 has a cable length of 1.5 metres.

5. Can this pigtail be used in FTTH installations?

Yes. It is specified for FTTH applications where an OS2 single mode fiber pigtail with an SC/APC connector is required. Confirm compatibility with the optical distribution equipment and installation design.

6. What is the difference between SC/APC and SC/UPC?

SC/APC connectors have an angled polished end face, while SC/UPC connectors use an ultra-physical-contact polish. They have different optical characteristics and should not be mated together as if they were interchangeable.

7. Does the Norden fiber pigtail include a warranty?

The supplied product information specifies a 1-year repair or replacement warranty. Confirm the applicable warranty terms when placing an order.

8. Where can I buy Norden fiber optic pigtails in Dubai?

You can contact Marvis Digital to enquire about the Norden 341-1OS2S315 and other fiber optic connectivity requirements in Dubai and across the UAE. Share the model number and required quantity to request a quotation.

Conclusion

The Norden SC/APC OS2 Fiber Optic Pigtail 1.5m PVC (341-1OS2S315) is a practical component for compatible single mode fiber termination projects. Its SC/APC connector, OS2 fiber type and 1.5-metre cable length make it suitable for specified fiber splicing, patch panel, FTTH and telecom applications. Before ordering, verify connector compatibility, cable requirements and installation conditions to ensure it matches your network design.

Contact Marvis Digital for product enquiries and quotations in the UAE.